Product Description
Â
OPTIONS OF SPECIFICATION AND STHangZhouRD
Â
Subject | Symbol | Description |
Sealing & Sealing type | Z | Metal shield on 1 side. |
ZZ | Metal shields on both sides. | |
RS | Rubber seal on 1 side. | |
2RS | Rubber seals on both sides. | |
ZNR | Shield on 1 side, snap ring groove in the outer ring, with snap ring on the opposite side of the shield | |
2ZNR | Shield on both sides, snap ring groove in the outer ring, with snap ring | |
ZNBR | Shield on 1 side, snap ring groove in the outer ring, with snap ring on the same side as the shield | |
Vibration Velocity | V | Normal vibration level. Is not indicated as a standard. |
V1 | Lower vibration level than normal. | |
V2 | Lower vibration level than V1. | |
V3 | Lower vibration level than V2. | |
V4 | Lower vibration level than V3. | |
Tolerances | P0(ABEC1) | Bearings in standard tolerance |
P6(ABEC3) | Tighter tolerance than standard bearings | |
P5(ABEC5) | Tolerance tighter than P6 | |
P4(ABEC7) | Tolerance tighter than P5 | |
P2(ABEC9) | Tolerance tighter than P4 | |
Radial internal clearance | C1 | Smaller clearance than C2 |
C2 | Smaller clearance than CN | |
CN(C0) | Clearance than normal | |
C3 | Clearance larger than CN | |
C4 | Clearance larger than C3 | |
C5 | Clearance larger than C4 | |
Snap Ring Groove | N | Snap ring groove in the outer ring |
NR | Snap ring groove in the outer ring, with snap ring | |
N1 | One locating slot in 1 outer ring side face | |
R | Flanged outer ring | |
Other technical modifications | NR | Groove with inserted snap ring in outer ring. |
N | Snap ring groove in the outer ring. | |
SS | Stainless steel. |
Cage Materials | J | Pressed steel cages |
M | Solid brass cage | |
F | Solid cage made from steel or iron | |
Y | Pressed brass cages. | |
T | Laminated phenolic cages. | |
TN | Polyamide cages | |
TH | Glass-fiber reinforced phenolic resin cages. | |
TV | Polyamide cage | |
Cage Designs | P | Window-type cage |
H | Claw-type cage | |
A | Cage guided on the bearing outer ring | |
B | Cage-guided on the bearing inner ring | |
S | Cage with lubricating slots in the guiding surfaces | |
D | Carbonitriding cage | |
W | Welded cage | |
R | Riveted Cage | |
Cage Types | N/A | Claw-type cage |
Ribbon cage | ||
Crown cage | ||
Sunflower cage | ||
Tapered cage |
This tech sheet may not contain all or every piece of information you want to know. Please contact our sales staff to obtain or compare the information.
Â
Designation | Boundary Dimension (mm) | Limiting Speed (rpm) | Load Rating (Kn) | Weight | ||||
Designation | Inner Diameter (d) |
Outside Diameter (D) |
Width (B) |
Grease Lubrication | Oil Lubrication | Dynamic Load (cr) |
Static Load (cor) |
Weight (kg) |
6201 | 12 | 32 | 10 | 19000 | 24000 | 6.82 | 3.05 | 0.037 |
6202 | 15 | 35 | 11 | 18000 | 22000 | 7.65 | 3.72 | 0.045 |
6203 | 17 | 40 | 12 | 16000 | 20000 | 9.58 | 4.78 | 0.065 |
6204 | 20 | 47 | 14 | 14000 | 18000 | 12.8 | 6.65 | 0.106 |
6205 | 25 | 52 | 15 | 13000 | 15000 | 14 | 7.85 | 0.128 |
6206 | 30 | 62 | 16 | 11000 | 13000 | 19.5 | 11.3 | 0.199 |
6207 | 35 | 72 | 17 | 9200 | 11000 | 25.7 | 15.4 | 0.288 |
6208 | 40 | 80 | 18 | 8000 | 10000 | 29.5 | 18 | 0.368 |
6209 | 45 | 85 | 19 | 7000 | 9000 | 31.5 | 20.5 | 0.416 |
6210 | 50 | 90 | 20 | 6700 | 8500 | 35 | 23.2 | 0.463 |
6211 | 55 | 100 | 21 | 6000 | 7500 | 43.2 | 29.2 | 0.603 |
6212 | 60 | 110 | 22 | 5600 | 7000 | 47.8 | 32.8 | 0.789 |
6213 | 65 | 120 | 23 | 5000 | 6300 | 57.2 | 40 | 0.99 |
6214 | 70 | 125 | 24 | 4800 | 6000 | 60.8 | 45 | 1.084 |
6215 | 75 | 130 | 25 | 4500 | 5600 | 66 | 49.5 | 1.171 |
6216 | 80 | 140 | 26 | 4300 | 5300 | 71.5 | 54.2 | 1.448 |
6217 | 85 | 150 | 28 | 4000 | 5000 | 83.2 | 63.8 | 1.803 |
6218 | 90 | 160 | 30 | 3800 | 4800 | 95.8 | 71.5 | 2.17 |
6219 | 95 | 170 | 32 | 3600 | 4500 | 110 | 82.8 | 2.62 |
6220 | 100 | 180 | 34 | 3400 | 4300 | 122 | 92.8 | 3.19 |
6221 | 105 | 190 | 36 | 3200 | 4000 | 133 | 105 | 3.78 |
6222 | 110 | 200 | 38 | 3000 | 3800 | 144 | 117 | 4.42 |
6224 | 120 | 215 | 40 | 2600 | 3400 | 155 | 131 | 5.3 |
6226 | 130 | 230 | 40 | 2400 | 3200 | 165 | 148 | 6.12 |
6228 | 140 | 250 | 42 | 2000 | 2800 | 179 | 167 | 7.77 |
6230 | 150 | 270 | 45 | 1900 | 2600 | 203 | 199 | 9.78 |
6232 | 160 | 290 | 48 | 1800 | 2400 | 215 | 218 | 12.22 |
6234 | 170 | 310 | 52 | 1700 | 2200 | 245 | 260 | 15.241 |
6236 | 180 | 320 | 52 | 1600 | 2000 | 262 | 285 | 15.518 |
6238 | 190 | 340 | 55 | 1500 | 1900 | 285 | 322 | 18.691 |
6240 | 200 | 360 | 58 | 1400 | 1800 | 288 | 332 | 22.577 |
40+ YEARS EXPERIENCEÂ
GOOD ENOUGH QUALITY, MUCH LESS MONEY COST!
With over 40 years experience of the bearing manufacturing, we know how to make good bearings with less cost consistently and efficiently.
 Â
 OWN HEAT TEATMENT PLANTS
Â
CONTROLLED QUALITY, CONTROLLED COST
With several heat treatment lines of our own, we have the following advantages over other suppliers:
— We can flexibly adjust our production schedule, which is very advantageous in times of capacity constraints;
— We can control the process more strictly to ensure the quality of our products;
— And this also brings some advantages in terms of product cost.Â
Â
LARGE STXIHU (WEST LAKE) DIS. STOCK:
 · Constant temperature (20°C) and humidity (RH 52%) warehouse
 · Hundreds of models on hand
 · Valued at CNY 30-50 million
 · Available for fast shipping
SAMPLES POLICYÂ
FREE SAMPLES AND SHIPPING
We are happy to send you free samples of our bearings for field testing. All transportation costs will be paid by us.
Please note: Depending on the model and value of samples, this policy may not apply!
Please contact our sales staff for details.
PACKING METHODS
1, Inner package
  Corrosion and Dust Proof PE plastic film / bag packing + Tube packing, or Wrapping tape for larger bearings
2, Outer package
  Corrugated carton + Wooden palletÂ
Â
1, About the lead time.
Â
Though we have a very large standing inventory, but this actually still depends on several factors, such as is the production schedule tight? Is there a corresponding model in stock, and is there enough of this model in stock? How many pcs of that model would be ordered?
Simply speaking, based on a 20′ GP container load:
If the model your Preferred is | Sufficient stock | Lead Time |
Regular models | YES | Within 7 days |
Regular models | NO | Within 30 days |
Non-regular model | NO | About 50 days |
For accurate estimate, please contact with our sale stuff. Thanks.
2, Minimum order quantity.
 Â
Our target customer is a regional or national distributor, or brand owner, with a significant volume of moving sales. Therefore, our minimum order quantity is one pallet,
regardless of whether the order is for 1 model or several.
However, you can try asking our salesmen if we accept orders smaller than 1 pallet.
 Â
3, If you don’t know which model is the right choice…
 Â
We would like to give you some advise if you like, according to the real situation and demand of your local market. Our purpose is to help you to get proper and right models for your customers, so that you would make a better sales and income finally.
4, Factory Inspection
We surely would welcome you or your representatives to come to our plants or working offices to take a good look and chat with our hardworking CZPT employees. Ask our sales stuff and she/he will arrange that for you.
Â
Material Option 2: | Stainless Steel |
---|---|
MOQ: | One Pallet |
Seals Options: | Z / 2z, Rz / 2rz, RS / 2RS, Rsz / Rzz, Zn / Znr / |
Lubrication: | Grease or Oil |
Transport Package: | Neutral Carton + Wood Pallet |
Trademark: | OEM for Brand Owners |
Samples: |
US$ 0/Piece
1 Piece(Min.Order) | |
---|
Customization: |
Available
| Customized Request |
---|
editor by CX 2023-11-07