Product Description

Production Descriptions:

We provide all sizes of deep groove ball bearing which is classified by open type and sealed type. They are with the following advantages.

1.low friction coefficient, low noise, low vibration

2.high rotational speeds

3.accommodate radial and axial loads

4.easy to install

5.low maintenance frequency
 

Product parameters
 

Deep Groove Ball Bearing 6000 Series
Bearing No. Shape Dimensions (mm) Basic Load Rating (KN) Max Speed (RPM) Weight(kg)
Bore Outer Width Dynamic Cr Static Cor Grease  lubricant Oil lubricant
d D B
6000 Series
606 6 17 6 1.95 0.72 30000 38000 0.0057
607 7 19 6 2.88 10.80 28000 36000 0.0071
608 8 22 7 3.32 1.38 26000 34000 0.011
609 9 24 7 3.35 1.40 22000 30000 0.014
6000 10 26 8 4.58 1.98 20000 28000 0.018
6001 12 28 8 5.10 2.38 19000 26000 0.02
6002 15 32 9 5.58 2.85 18000 24000 0.026
6003 17 35 10 6.00 3.25 17000 22000 0.036
6004 20 42 12 9.38 5.02 15000 19000 0.069
6005 25 47 12 10.10 5.85 13000 17000 0.075
6006 30 55 13 10.18 6.91 10000 14000 0.116
6007 35 62 14 12.47 8.66 9000 12000 0.155
6008 40 68 15 13.10 9.45 8500 11000 0.185
6009 45 75 16 16.22 11.96 8000 10000 0.231
6571 50 80 16 16.94 12.95 7000 9000 0.250
6011 55 90 18 23.28 17.86 7000 8500 0.362
6012 60 95 18 24.35 19.35 6300 7500 0.385
6013 65 100 18 24.66 19.74 6000 7000 0.410
6014 70 110 20 29.68 24.20 5600 6700 0.575
6015 75 115 20 30.91 26.06 5300 6300 0.603
6016 80 125 22 36.57 31.36 5000 6000 0.921
6017 85 130 22 39.04 33.75 5000 6000 0.848
6018 90 140 24 44.63 39.16 4800 5600 1.103
6019 95 145 24 44.45 39.16 4500 5300 1.156
6571 100 150 24 49.58 44.08 4300 5300 1.174
6571 105 160 26 55.32 49.77 4000 4800 1.520
6571 110 170 28 62.99 57.39 3800 4500 1.891

Deep Groove Ball Bearing 6200 Series
Bearing No. Shape Dimensions (mm) Basic Load Rating (KN) Max Speed (RPM) Weight(kg)
Bore Outer Width Dynamic Cr Static Cor Grease  lubricant Oil lubricant
d D B
6200 Series
623 3 10 4 0.5 0.2156 38000 48000 0.0015
624 4 13 5 1.15 0.40 36000 45000 0.0032
625 5 16 5 1.88 0.68 32000 40000 0.0048
626 6 19 6 2.8 1.05 28000 36000 0.0075
627 7 22 7 3.28 1.35 26000 34000 0.012
628 8 24 8 3.35 1.40 24000 32000 0.017
629 9 26 8 4.45 1.95 22000 30000 0.019
6200 10 30 9 5.1 2.38 19000 26000 0.571
6201 12 32 10 6.82 3.05 18000 24000 0.034
6202 15 35 11 7.65 3.72 17000 22000 0.043
6203 17 40 12 9.58 4.47 16000 20000 0.062
6204 20 47 14 9.88 6.20 14000 18000 0.102
6205 25 52 15 10.78 6.98 12000 16000 0.120
6206 30 62 16 14.97 10.04 9500 13000 0.190
6207 35 72 17 19.75 13.67 8500 11000 0.270
6208 40 80 18 22.71 15.94 8000 10000 0.370
6209 45 85 19 24.36 17.71 7000 9000 0.380
6210 50 90 20 26.98 19.84 6700 8500 0.450
6211 55 100 21 33.37 25.11 6000 7500 0.603
6212 60 110 22 36.74 27.97 5600 7000 0.789
6213 65 120 23 44.01 34.18 5000 6300 0.990
6214 70 125 24 46.79 37.59 4800 6000 1.084
6215 75 130 25 50.85 41.26 4800 5600 1.171
6216 80 140 26 55.04 45.09 4500 5300 1.448
6217 85 150 28 64.01 53.28 4300 5000 1.803
6218 90 160 30 73.83 60.76 4000 4800 2.172
6219 95 170 32 84.83 70.85 3800 4500 2.620
6220 100 180 34 93.95 79.35 3600 4300 3.189
6221 105 190 36 102.30 89.59 3400 4000 3.782
6222 110 200 38 110.82 100.43 3200 3800 4.421

Bearing No. Shape Dimensions (mm) Basic Load Rating (KN) Max Speed (RPM) Weight(kg)
Bore Outer diameter Width Dynamic Cr Static Cor Grease  lubricant Oil lubricant
d D B
6300 Series
634 4 16 5 1.447 0.745 32000 40000 0.0049
635 5 19 6 2.161 1.163 28000 36000 0.0073
6300 10 35 11 5.88 3.47 20000 26000 0.054
6301 12 37 12 7.48 4.65 17000 22000 0.058
6302 15 42 13 8.80 5.43 16000 20000 0.082
6303 17 47 14 10.45 6.56 15000 19000 0.110
6304 20 52 15 12.26 7.81 13000 17000 0.140
6305 25 62 17 17.22 11.39 10000 14000 0.220
6306 30 72 19 20.77 14.17 9000 12000 0.330
6307 35 80 21 25.66 17.92 8000 10000 0.410
6308 40 90 23 31.35 22.38 7000 9000 0.600
6309 45 100 25 40.66 30.00 6300 7500 0.770
6310 50 110 27 47.58 35.71 6000 7000 1.030
6311 55 120 29 55.05 41.91 5600 6700 1.367
6312 60 130 31 62.88 48.60 5000 6000 1.710
6313 65 140 33 72.21 56.68 4500 5300 2.100
6314 70 150 35 80.10 63.48 4300 5000 2.550
6315 75 160 37 87.25 71.67 4300 5000 3.046
6316 80 170 39 94.57 80.35 4000 4800 3.609
6317 85 180 41 102.05 89.52 3800 4500 4.284
6318 90 190 43 110.81 100.76 3600 4300 4.979
6319 95 200 45 120.51 113.75 3300 3900 5.740
6320 100 215 47 133.06 131.18 3200 3700 7.090
Bearing No. Shape Dimensions (mm) Basic Load Rating (KN) Max Speed (RPM) Weight(kg)  
Bore Outer diameter Width Dynamic Cr Static Cor Grease  lubricant Oil lubricant  
d D B  
6400 Series                  
6410 50 130 31 92 55 5300 6300 1.85  
6411 55 140 33 77.44 67.71 5000 6000 2.316  
6412 60 150 35 83.94 70.30 4800 5600 2.811  
6413 65 160 37 90.88 78.33 4500 5300 3.342  
6414 70 180 42 107.31 99.53 4000 4800 4.896  
6415 75 190 45 153 114 3800 4500 5.57  
6416 80 200 48 164 125 3400 4000 6.63  
6417 85 210 52 165 136 3200 3800 8.12  
6418 90 225 54 193 158 3000 3600 9.47  
6419 95 240 55 204 171 3400 3600 13.4  
6420 100 250 58 224 195 2600 3400 12.8  
6422 110 280 65            

 

  

                                                                                                                                                             
                                  COMPANY   PROFILE 
 

ZheJiang Dente International Trade Co.,Ltd is a comprehensive enterprise with factory and trading company.  we are focusing on import and export business based on our own bearing factory which is located in HangZhou City where is the largest bearing wholesale base in China. 

Our products include deep groove ball bearing, tapered roller bearing, pillow block bearing, self-aligning ball bearing, spherical roller bearing, cylindrical roller bearing, thrust ball bearing, non-standard bearing of automobiles. Sim   ultaneously we also supply needle roller bearing, stainless steel bearing ,inch series bearing, non-standard bearing, imported bearing of global brand, wheel hub bearing. And we also supply some customized bearing.

Your satisfication is our goal, expecting your inquiries.

Our Advantages:

1.Free samples,fast delivery

2.Small order accepted

3.OEM service welcome

4.Customers’ drawing or samples accepted

5.Excellent and high quality control,high speed,low noise,long life
 

  Packing & shipping

    1.Tubes+cartons+pallets 

 

   2.Inner plastic bags+ cartons+ pallets

 

   3.According to your requirements

FAQ
1.Are you trading company or manufacturer?
We are factory.

2.How long is your delivery time?
Generally it is 5-10 days if the goods arein stock.or it is 10-20 days if the goods are not in stock, it is according to quantity

3.Do you provide samples? is it free or extra?
Yes.we could offer the sample for free charge but do not pay the cost of freight.

Pls don’t hesitate to let us know if you have any problem
                                                            

Contact Angle: 0
Aligning: Non-Aligning Bearing
Separated: Unseparated
Samples:
US$ 0.2/Piece
1 Piece(Min.Order)

|

Order Sample

Chrome steel
Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

deep groove ball bearing

Are there specific maintenance practices that can extend the life of deep groove ball bearings?

Proper maintenance practices are essential for maximizing the lifespan and performance of deep groove ball bearings. By following specific maintenance procedures, it is possible to extend the life of these bearings and ensure their smooth operation. Here’s a detailed explanation of specific maintenance practices that can help extend the life of deep groove ball bearings:

  • Regular Lubrication:
  • Proper lubrication is vital for reducing friction and preventing premature wear in deep groove ball bearings. Regularly lubricating the bearings with the appropriate lubricant helps maintain a protective film between the rolling elements and raceways, reducing friction and minimizing the risk of metal-to-metal contact. Lubrication intervals should be based on the manufacturer’s recommendations and operating conditions.

  • Correct Lubricant Selection:
  • Choosing the right lubricant is crucial for the optimal performance and longevity of deep groove ball bearings. Factors such as operating temperature, speed, load, and environmental conditions should be considered when selecting a lubricant. Consulting the bearing manufacturer’s recommendations or seeking expert advice can help ensure the correct lubricant is chosen for the specific application.

  • Proper Installation:
  • Correct installation techniques are essential to prevent damage to deep groove ball bearings. This includes ensuring proper alignment, applying appropriate mounting force, and using suitable tools and methods during installation. Improper installation can lead to misalignment, increased stress on the bearings, and premature failure. Following the manufacturer’s installation instructions or seeking professional assistance is recommended.

  • Regular Inspections:
  • Regular inspections allow for the early detection of any potential issues with deep groove ball bearings. Inspections can involve checking for signs of wear, damage, or contamination, as well as assessing the condition of seals or shields. Inspecting bearings at predetermined intervals and addressing any identified issues promptly can help prevent further damage and extend the bearing’s service life.

  • Effective Sealing:
  • Properly functioning seals or shields help protect deep groove ball bearings from contamination, moisture, and other harmful substances. Regularly inspecting and maintaining the seals or shields ensures their effectiveness in preventing the ingress of contaminants and preserving the lubricant’s integrity. If seals or shields are damaged or worn, they should be replaced promptly.

  • Appropriate Handling and Storage:
  • Proper handling and storage practices are crucial to prevent damage to deep groove ball bearings before installation. Bearings should be handled with clean hands or suitable gloves to avoid introducing contaminants. They should be stored in a clean, dry, and vibration-free environment, ideally in their original packaging or protective covers, until they are ready for use.

  • Monitoring Operating Conditions:
  • Regularly monitoring the operating conditions of machinery or equipment can help identify potential issues that may affect the performance of deep groove ball bearings. Factors such as load variations, temperature fluctuations, excessive vibration, or abnormal noise should be monitored and addressed promptly. Taking corrective actions to optimize operating conditions can help prolong the life of the bearings.

By implementing these specific maintenance practices, it is possible to extend the life of deep groove ball bearings and ensure their reliable and efficient operation. Following manufacturer recommendations, consulting with experts, and adhering to proper maintenance procedures are key to achieving optimal performance and longevity of deep groove ball bearings.

deep groove ball bearing

What are the common applications and industries where deep groove ball bearings are widely used?

Deep groove ball bearings are versatile components that find extensive use in various applications and industries. Here’s a detailed explanation of the common applications and industries where deep groove ball bearings are widely used:

  • Automotive Industry:
  • Deep groove ball bearings are extensively used in the automotive industry for applications such as wheel hubs, transmissions, engines, electric motors, and steering systems. They provide reliable performance, low friction, and high-speed capabilities, making them suitable for a wide range of automotive components.

  • Industrial Machinery:
  • Deep groove ball bearings are widely employed in industrial machinery, including pumps, compressors, fans, conveyors, and machine tools. Their ability to accommodate radial and axial loads, high rotational speeds, and their durability make them ideal for various motion and power transmission applications.

  • Electrical Motors and Generators:
  • Deep groove ball bearings are commonly used in electric motors and generators. They facilitate smooth operation, reduce friction losses, and support high-speed rotation. These bearings are found in a wide range of motor-driven equipment, such as household appliances, HVAC systems, power tools, and electric vehicles.

  • Agricultural Machinery:
  • Deep groove ball bearings are utilized in agricultural machinery and equipment, including tractors, harvesters, irrigation systems, and farm implements. They provide reliable performance in demanding and harsh environments, helping to support the agricultural industry’s productivity and efficiency.

  • Construction and Mining Equipment:
  • Deep groove ball bearings are used in construction and mining equipment, such as excavators, loaders, bulldozers, and crushers. These bearings withstand heavy loads, shock, and vibration, contributing to the reliable operation of machinery in challenging construction and mining environments.

  • Material Handling Equipment:
  • Deep groove ball bearings play a vital role in material handling equipment, including forklifts, conveyors, cranes, and hoists. They enable smooth and efficient movement of goods, handling heavy loads, and operating in diverse conditions encountered in warehouses, distribution centers, and manufacturing facilities.

  • Medical and Dental Equipment:
  • Deep groove ball bearings are utilized in various medical and dental equipment, including surgical instruments, dental handpieces, imaging systems, and laboratory devices. They offer precision, smooth operation, and low noise, meeting the stringent requirements of the healthcare industry.

  • Home Appliances:
  • Deep groove ball bearings are found in a wide range of home appliances, such as washing machines, refrigerators, air conditioners, vacuum cleaners, and kitchen appliances. They provide reliable and quiet operation, contributing to the performance and durability of these everyday household products.

  • Sports and Fitness Equipment:
  • Deep groove ball bearings are used in sports and fitness equipment, including bicycles, skateboards, fitness machines, and gym equipment. They enable smooth and efficient rotation, reducing friction and enhancing the performance of sporting and fitness activities.

In summary, deep groove ball bearings are widely used in applications and industries such as automotive, industrial machinery, electrical motors and generators, agricultural machinery, construction and mining equipment, material handling equipment, medical and dental equipment, home appliances, and sports and fitness equipment. Their versatility, reliability, and ability to withstand various operating conditions make them indispensable components in numerous sectors.

deep groove ball bearing

What considerations are important when selecting the appropriate size and material for a deep groove ball bearing?

When selecting the appropriate size and material for a deep groove ball bearing, several important considerations should be taken into account. These considerations ensure that the bearing is properly matched to the application requirements, leading to optimal performance and longevity. Here’s a detailed explanation of the key considerations when selecting the size and material for a deep groove ball bearing:

  • Load Requirements:
  • The anticipated load conditions, both radial and axial, are a critical factor in determining the appropriate size and material for a deep groove ball bearing. The bearing must be able to support the expected loads without excessive deformation or premature failure. The load capacity and fatigue life characteristics of the bearing should be carefully evaluated to ensure it can withstand the applied loads throughout its intended service life.

  • Speed and Operating Conditions:
  • The rotational speed and operating conditions of the application play a significant role in bearing selection. High-speed applications require bearings that can withstand the centrifugal forces and maintain stability, while heavy-duty or harsh operating conditions may necessitate materials with superior corrosion resistance or high-temperature capability. The bearing’s maximum allowable speed, temperature range, and environmental factors should be considered to ensure reliable and long-lasting performance.

  • Accuracy and Tolerance:
  • The required level of accuracy and tolerance in the application should be considered when selecting a deep groove ball bearing. Precision applications, such as machine tools or instrumentation, often demand bearings with tighter tolerances and higher levels of accuracy to achieve the desired performance. Assessing the required dimensional accuracy, running accuracy, and clearance requirements enables the selection of a bearing that meets the specific application’s precision needs.

  • Lubrication and Maintenance:
  • The lubrication and maintenance requirements influence the choice of bearing material. Factors such as operating temperature, speed, and contamination levels impact the selection of an appropriate lubricant and bearing material combination. High-temperature or high-speed applications may require materials with enhanced heat dissipation or lubrication capabilities, while environments with contaminants or moisture may necessitate corrosion-resistant materials or protective seals. Considering the lubrication and maintenance demands ensures the bearing can operate reliably under the specified conditions.

  • Space Constraints and Design:
  • The available space and design constraints within the application are crucial considerations when selecting the size of a deep groove ball bearing. The bearing dimensions, including outer diameter, inner diameter, and width, must be compatible with the available space and mating components. It is important to consider the bearing’s installation method, whether it requires a press fit, clearance fit, or other mounting arrangements, to ensure proper assembly and alignment within the application.

  • Cost and Availability:
  • Cost-effectiveness and availability are practical considerations in bearing selection. Evaluating the cost of the bearing in relation to its expected performance, service life, and maintenance requirements helps determine the best value for the application. Additionally, considering the availability and lead times of the selected bearing type and size ensures timely procurement and minimizes potential production delays or downtime.

By carefully considering these factors – load requirements, speed and operating conditions, accuracy and tolerance, lubrication and maintenance, space constraints and design, and cost and availability – when selecting the size and material for a deep groove ball bearing, it is possible to choose a bearing that is well-suited to the specific application’s needs. This ultimately leads to optimized performance, durability, and reliability of the bearing within the intended application.

China Hot selling 6000/6100/6200/6300/6400 Deep Groove Ball Bearing for Car Parts/Motor Parts/Auto Parts/Agriculture Machine/Brand OEM   bearing driver kitChina Hot selling 6000/6100/6200/6300/6400 Deep Groove Ball Bearing for Car Parts/Motor Parts/Auto Parts/Agriculture Machine/Brand OEM   bearing driver kit
editor by CX 2023-11-16