Product Description

China Wholesaler of Single Row Taper Roller Bearing 35715 with OEM Service 
 

Tapered roller bearings refer to the radial thrust rolling bearings whose rolling body is a tapered roller. There are 2 types of small Angle and large Angle. The taper Angle is mainly subjected to radial and axial combined loads, which are usually in double use and reverse installation. The inner and outer seat rings can be installed separately, and the radial and axial clearance can be adjusted during installation and use. The large cone Angle mainly bears the combined axial and radial load, which is not used to bear the pure axial load separately.

Technical parameters of taper roller bearings:

BEARING NO. d D T
35712 15 35 11.75
35713 17 40 13.25
35714 20 47 15.25
35715 25 52 16.25
35716 30 62 17.25
35717 35 72 18.25
35718 40 80 19.25
35719 45 85 20.75
35710 50 90 21.75
35711 55 100 22.75
35712 60 110 23.75
35713 65 120 24.75
35714 70 125 26.25
35715 75 130 27.25
35716 80 140 28.25
35717 85 150 30.5
35718 90 160 32.5
35719 95 170 34.5
35710 100 180 37
35711 105 190 39
35712 110 200 41
35714 120 215 43.5
35716 130 230 43.75
35718 140 250 45.75
35710 150 270 49
35712 160 290 52
35714 170 310 57
35716 180 320 57
35718 190 340 60
35710 200 360 64
       
30302 15 42 14.25
30303 17 47 15.25
30304 20 52 16.25
30305 25 62 18.25
30306 30 72 20.75
30307 35 80 22.75
30308 40 90 25.25
30309 45 100 27.25
3571 50 110 29.25
3571 55 120 31.5
3571 60 130 33.5
3571 65 140 36
3571 70 150 38
3571 75 160 40
3 0571 80 170 42.5
3 0571 85 180 44.5
3 0571 90 190 46.5
3571 95 200 49.5
30320 100 215 51.5
30321 105 225 53.5
30322 110 240 54.5
30324 120 260 59.5
30326 130 280 63.75
30328 140 300 67.75
30330 150 320 72
3571 260 540 114

Designation d D T B C Load Ratings Fatigue Load Speed Ratings Mass
Limit Lubrication
  mm Dynamic [C] Static [C0] Pu(kN) Grease Oil Kg.
32205 25 52 19,25 18 15 45.7 48.4 5.12 10000 13000 0.19
32206 30 62 21,25 20 17 64.4 62.7 6.93 9000 11000 0.28
32207 35 72 24,25 23 19 84.2 85.8 9.35 8000 9500 0.43
32208 40 80 24,75 23 19 93.5 95.2 10.78 7000 8500 0.53
32213 65 120 32,75 31 27 166.1 212.3 25.08 4000 5600 1.5
32214 70 125 33,25 31 27 172.7 228.8 26.95 3800 5300 1.6
32215 75 130 33,25 31 27 177.1 233.2 26.95 3600 5000 1.7
32216 80 140 35,25 33 28 205.7 269.5 31.35 3400 4500 2.05
32217 85 150 38,5 36 30 233.2 313.5 36.85 3200 4300 2.6
32218 90 160 42,5 40 34 276.1 374 42 3000 4000 3.35
32219 95 170 45,5 43 37 309.1 429 47 2800 3800 4.05
32220 100 180 49 46 39 350.9 484 53 2600 3600 4.9
32221 105 190 53 50 43 393.8 561 61 2600 3400 6
32222 110 200 56 53 46 442.2 627 67 2400 3200 7.1
32224 120 215 61,5 58 50 514.8 764.5 79 2200 3000 9.15
32226 130 230 67,75 64 54 605 913 94 2000 2800 1.15
32228 140 250 71,75 68 58 708 1100 110 1900 2600 1.45
32230 150 270 77 73 60 811 1254 123 1700 2400 17.5
32232 160 290 84 80 67 968 1540 145 1600 2200 2.55
32234 170 310 91 86 71 1111 1793 165 1500 2000 28.5
32236 180 320 91 86 71 1111 1793 165 1400 1900 29.5
32240 200 360 104 98 82 1331 2200 198 1300 1700 42.5
32244 220 400 114 108 90 1771 2970 255 1100 1500 60
32248 240 440 127 120 100 1969 3685 303 1000 1400 83.5
32252 260 480 137 130 106 2420 4015 330 900 1200 105
32260 300 540 149 140 115 3571 5225 402 800 1100 140

 

Model Number  d(mm) D(mm) W(mm) Brand 
33215 3007215E 75 130 41 ZYS
33214 3007214E 70 125 41 ZYS
33213 3007213E 65 120 41 ZYS
33212 30571E 60 110 38 ZYS
33211 3007211E 55 100 35 ZYS
33210 3007210E 50 90 32 ZYS
33209 3007209E 45 85 32 ZYS
33208 3007208E 40 80 32 ZYS
33207 3007207E 35 72 28 ZYS
33205 3007205E 25 52 22 ZYS
33571 30 0571 2E 110 170 47 ZYS
33571 30 0571 1E 105 160 43 ZYS
33571 30 0571 0E 100 150 39 ZYS
33019 35719E 95 145 39 ZYS
33015 35715E 75 115 31 ZYS
33013 35713E 65 100 27 ZYS
33012 35712E 60 95 27 ZYS
32314 7614E 70 150 54 ZYS
32313 7613E 65 140 51 ZYS
32312 7612E 60 130 48.5 ZYS
32311 7611E 55 120 45.5 ZYS
32310 7610E 50 110 42.25 ZYS
32309 7609E 45 100 38.25 ZYS
32308 7608E 40 90 35.25 ZYS
32307 7607E 35 80 32.75 ZYS
32306 7606E 30 72 28.75 ZYS
32305 7605E 25 62 25.25 ZYS
32304 7604E 20 52 22.25 ZYS
32224 7524E 120 215 61.5 ZYS
32222 7522E 110 200 56 ZYS
32221 7521E 105 190 53 ZYS
32220 7520E 100 180 49 ZYS
32219 7519E 95 170 45.5 ZYS
32218 7518E 90 160 42.5 ZYS
32217 7517E 85 150 38.5 ZYS
32216 7516E 80 140 35.25 ZYS
32215 7515E 75 130 33.25 ZYS
32214 7514E 70 125 33.25 ZYS
32213 7513E 65 120 32.75 ZYS
32212 7512E 60 110 29.75 ZYS
32211 7511E 55 100 26.75 ZYS

The characteristics:
1. Enhance the interior design.
2. Special cage design.
3. Improve the accuracy and adjust the internal clearance.
4. Ring with locking slot design to prevent rotation.

ZYS ADVANTAGES
 HangZhou Bearing Research Institute Co., Ltd. is a high-tech enterprise specializing in the development of “high-rank, precise, advanced, unique, special” bearing products for the key units in various fields of national economic construction. Its predecessor, HangZhou Bearing Research Institute, was established in 1958. It is the only state-level comprehensive research institute in China’s bearing industry. In 1999, it entered China National Machinery
 Industry Group Co., Ltd. and transformed into a science and technology enterprise.
We have total assets of 2.06 billion RMB, own one research and development center, 3 industrial bases and cover an area of more than 47 hectares. We have advanced bearing manufacturing equipments and world first-class testing equipments and have solid strength in manufacturing, measuring and testing of bearing and related components with high precision and high reliability. We have more than 380 technical staff of bearing related disciplines, thus we maintain a leading position in the aspects of bearing design, basic theoretical research, lubrication technology, metallic and non-metallic materials, testing and industry standards. 

ZYS Manufacturing capacity

ZYS QUALITY ASSURANCE

ZYS bearing products

FAQ:

Q: Are you trading company or manufacturer?
A: CZPT is bearing manufacturer, the only first-class comprehensive research institute in China bearing industry.

Q: How do you control quality of bearing?
A: CZPT has established quality control systems for each kind of bearing and spindle. All products and services passed ISO9001-2008 Quality Certificate.

Q: What is the MOQ?
A: It depends on the bearing type. You can send inquiry for more information.

Q: How about the package?
A: Industrial packing in general condition (Plastic tube+ carton+ pallet). Accept design package when OEM.

Q: How long is the delivery time?
A: It will take about 10 to 40 days, depends on the model and quantity.

Q: How about the shipping?
A: We can arrange the shipment or you may have the forwarder.

Q: Is sample avaiable?
A: Yes, sample order is acceptable.

Q: Can we use our own LOGO or design on bearings?
A: Yes. OEM is acceptable. We can design the bearing with your requirements and use your own LOGO and package design.

Rolling Body: Roller Bearings
The Number of Rows: Single
Outer Dimension: Small and Medium-Sized (60-115mm)
Material: Bearing Steel
Spherical: Non-Aligning Bearings
Load Direction: Axial Bearing
Samples:
US$ 9.5/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

bearing

Types of Ball Bearings

There are several types of ball bearings: Double-row angular contact, Four-point contact, Self-aligning, and Ceramic hybrid. Here’s a brief description of each. For more information, read our article about Double-row angular contact ball bearings. You’ll be better informed about how they’re made. Also, learn about how the cages that hold the balls in place are secured with rivets.

Double-row, angular-contact bearing

Double-row, angular-contact ball bearings are similar in their contact surfaces in one direction, and the two pairs of bearings are installed axially opposite to one another. This design allows them to support combined loads in axial and radial directions. These types of bearings are used for high-precision, high-speed applications. They can be used in everything from turbines to dentistry equipment. Double-row, angular-contact bearings are available at Grainger, as are single-row versions.
Double-row, angular-contact ball bearings are a popular option for applications where high precision and high speed are required. The design features of these bearings are ideal for applications with axial space restrictions. In contrast, they are smaller than two single-row angular-contact bearings and are available in steel, polyamide, or brass cages. Whether you need a cage for high speed or hard operating conditions is up to you. If you are unsure about the right cage for your application, contact Schaeffler.
Single-row angular-contact ball bearings are the most common type of bearings. Double-row bearings are also available with a shielded outer ring, which protects the balls inside the bearing from external contaminants. Because these double-row bearings are a good choice for applications requiring high performance, they are often the most affordable option. They offer similar performance as single-row bearings but are much more rigid.
Preloading is a key performance characteristic for double-row angular-contact ball bearings. Preloading can decrease the service life of double-row angular-contact ball bearings by up to 380 percent. Alternatively, you can preload double-row angular-contact ball bearings by placing spacers between their outer rings. Good double-row angular-contact bearing installation will increase working accuracy and bearing life.

Four-point contact ball bearing

The Four Point Contact Ball Bearing Market can be segmented into three types: 35 Degree, 45 Degree, and Other. The 35 Degree segment is expected to witness the fastest growth over the next few years, owing to its increased operational speed and competence in axial and radial axis load handling. Other types of four-point contact ball bearings include the Miniature and Deep Groove varieties. These are widely used in automobiles, aerospace, and other industries.
These bearings are designed for oil-free screw compressors, and they feature an outer-ring guided brass cage to reduce friction and increase running accuracy. In addition, they have lower maintenance costs compared to conventional bearings. However, they have a higher mean roughness value than their counterparts. High-speed operations require high-speed bearings that can withstand fast speed changes. This is because of the higher friction rate, which results from four-point contact.
The Four-Point Contact Ball Bearing is a highly versatile product, as it can handle radial, thrust, and moment loads. Because of this, it is often the first choice for slow to moderate-speed applications. This design also has a simplified assembly process, requiring only a single double-half-turn to install. It is the first choice of many automotive OEMs because it is extremely efficient. If you want a ball bearing with these benefits, you should contact a local bearing company.
The Four-Point Contact Ball Bearing Market will continue to grow despite a tough economy and volatile trade conditions. Demand for automotive and aerospace components is expected to grow alongside a variety of technological advancements. Meanwhile, demand for energy-efficient products will continue to increase with changes in trade policy, an imbalance in the supply-side ecosystem, and geopolitical risk. And while all these factors will continue to drive the market growth, a few challenges are worth considering.
The Four-Point Contact Bearing is designed with the same basic structure as its two-point counterpart. In a four-point contact ball bearing, one ball can have four distinct points of contact with two rings. Two of these contact points may be in diagonal position. The two remaining contact points change position and accommodate radial loads. Consequently, the Four-Point Contact Bearing is more flexible and robust than its two-point counterparts.
bearing

Self-aligning ball bearing

The self-aligning ball bearing is an incredibly useful tool in many industries. This type of bearing has a sealing lip that makes contact with a smooth chamfer on the inner ring. Because of the self-aligning nature of these bearings, they are not prone to misalignment. They can withstand temperatures ranging from -30°C to 120°C and should not be heated prior to installation.
A self-aligning ball bearing is an elastomer-based spherical-shaped bearing with two rows of rolling elements. These bearings can accommodate large radial loads, and their outer ring raceway is curved to provide a spherical effect. The inner ring, or cage, can be either cylindrical or conical. The inner diameter of a self-aligning ball bearing is normally cylindrical, but some are conical. They typically have three oil holes.
When choosing a self-aligning ball bearing, look for a model with a large enough bearing diameter to accommodate the shaft’s bending. Self-aligning bearings may also be interchangeable with standard ball bearing assemblies. You can find individual values in manufacturer catalogues. These bearings are useful in limited applications, although they are not necessarily ideal for everything. For example, in applications where combined loads are the main concern, self-aligning ball bearings should only be used if the application requires minimal misalignment.
A self-aligning ball bearing is a highly-efficient, energy-efficient solution for a variety of applications. It is a simple, low-maintenance solution that makes your life easier. Its unique outer raceway allows restraining springs to absorb the deflection that is common in other bearings. The result is a cooler, smoother running vehicle. It also helps prevent misalignment, which makes it ideal for use in many applications.
The SKF self-aligning ball bearing is an excellent choice for applications involving heavy deflection of the shaft. They are the lowest-friction bearing available. Their steel plate reinforced seals prevent them from separating from the shaft during operation. They are also resistant to oil, making them the perfect solution for high-speed applications. In addition to this, they are designed to work in a wide range of temperatures.
bearing

Ceramic hybrid ball bearing

A hybrid ball bearing made from a combination of steel and ceramics is a good option for high-speed applications requiring electrical isolation. This combination offers an extended lifespan and minimal electrical corrosion or seizure risk. In addition, the hybrid ball bearings have less friction than steel bearings and can operate at low speeds. To learn more about this hybrid type of bearing, continue reading. We’ll also discuss how it can help your application.
Full ceramic balls are generally harder than steel, but they do have lower density, meaning they’re not subject to the same high centrifugal forces as steel balls. These benefits make ceramic ball bearings much more durable, with long lifespans. Both full and hybrid ceramic ball bearings are available from CZPT. Read on to learn more about each type. Here’s a look at some of the benefits of each. You’ll be pleasantly surprised.
A hybrid ball bearing consists of steel inner and outer rings and a ceramic ball. It can withstand high speeds and loads, but it’s also designed to operate in extreme temperatures. This hybrid ball bearing also requires minimal lubrication and is suitable for a variety of applications. Because of its unique characteristics, hybrid bearings are lightweight and hard, and they spin faster than steel balls. But how do you choose the right one for your application?
A ceramic ball bearing is better than a steel one for many applications. Its greater speed capability and lower friction allow it to operate at higher speeds than steel balls. It is also less sensitive to fluctuations in lubrication conditions than steel balls. They also tend to be cheaper, so it makes sense to invest in one. It’s worth your while. They last longer, and they don’t require a run-in period.
A hybrid ball bearing is the best choice for electric spindles with high speed and heavy loads. A hybrid ceramic ball bearing has the advantage of low heat and high stiffness, and can operate at high speeds and loads. This thesis explores the dynamic characteristics of a hybrid ceramic ball bearing, including analysis calculations and experiment verification. The results provide reliable data and lay the foundation for professional spindle optimum design tests. It is a worthy addition to any machine shop.

China high quality China Wholesaler of Single Row Taper Roller Bearing 30205 with OEM Service   carrier bearingChina high quality China Wholesaler of Single Row Taper Roller Bearing 30205 with OEM Service   carrier bearing
editor by CX 2023-11-14