Product Description

Product Description

6800 series deep groove ball bearings
product-list-1.html

 

Bearing NO (mm)Boundary Dimensions (Kn) (Kn) (r/min)
Limit Rotational Speed
(Kg)
Weight
d D B Dynamic Load Rating
Cr
Static Load Rating
Cor
Grease Lubrication Oil Lubrication
6800 10 19 5 1.72 0.84 34000 40000 0.0053
6801 12 21 5 1.92 1.04 32000 38000 0.0068
6802 15 24 5 2.07 1.26 28000 34000 0.0075
6803 17 26 5 2.63 1.57 26000 30000 0.0083
6804 20 32 7 4.0 2.47 22000 26000 0.02
6805 25 37 7 4.5 3.15 18000 22000 0.571
6806 30 42 7 4.7 3.65 15000 18000 0.026
6807 35 47 7 4.9 4.1 14000 16000 0.571
6808 40 52 7 6.35 5.5 12000 14000 0.033
6809 45 58 7 6.6 6.15 11000 13000 0.041
6810 50 65 7 6.4 6.2 9500 11000 0.054
6811 55 72 9 8.8 8.5 8500 10000 0.081
6812 60 78 10 11.5 10.9 8000 9500 0.101
6813 65 85 10 11.9 12.1 7500 8500 0.12
6814 70 90 10 12.1 12.7 6700 8000 0.13
6815 75 95 10 12.5 13.9 6300 7500 0.14
6816 80 100 13 12.7 14.5 6000 7100 0.15
6817 85 110 13 18.7 20 5600 6700 0.27
6818 90 115 13 19.0 21 5300 6300 0.28
6819 95 120 13 19.3 22 5000 6000 0.29
6820 100 125 13 19.6 23 4800 5600 0.31
Note:Above-mentioned products include its modification series,such as Z,2Z,RS,and 2RS etc.

 

Detailed Photos

 


Black chamfer with rubber seal

Black chamfer with white dust cover

open UG

white chamfer with yellow dust cover

ceramic ball bearing

THE USE OF THE BEARING
Some tips on use
Rolling bearing is a precise part. Therefore it should be used carefully. No matter how high performance the bearing has, it can be obtained by improper use, the followings are the points for attention to use bearings.
(1) Keep clean the bearing and its surrounding areas
It is harmful to the bearing even by tiny dust which can not be seen by human eyes. Therefore it should always keep clean the surrounding environments in order to prevent the bearing from dust corrosion.
(2) Use bearing carefully
Scar and indentation can essily be produced out of strong impact to the bearing in use and become the cause of accidents. Therefore special caution should be given to its use.
(3) Use the appropriate operating tool
Avoid using a hammer or heavy direct tap on a bearing or sleeve, must use appropriate tools such as press or heating.
(4) Be careful to the rust corrosion of the bearings
The sweat in the hands will cause rust in operating the bearings. Therefore your hands should be cleanly washed and dried before operation. You’d better wear gloves in doing the work. 
(5) Handler should familiar with bearing
(6) Establish bearing handling criteri
·Bearing storage
.Bearing and surrounding cleaning
.Dimension of mounting parts and inspection
.Machining quality
.Mounting handing
.After mounting inspection
·Disassembly handing
·Keep maintain
·Adding lubricant

 

Installation Instructions

 Bearing mounting
 Precautions for proper mounting of bearing
1) Bearing preparation
Bearing should not be unpacked until before mounting due to spray anti-corrosion oil and pack anti-corrosion paper. In addition, spray anti-corrosion oil on bearing have good lubricate function. For general purpose, just directly using bearing fill-in grease bearings, without cleaning. However, bearing for instrument or high speed rotating must be cleaned with clean filtered oil in order to remove the anti-corrosion oil. At that time, the bearings are easy to corrosion could not storage long term.
2) Inspection of shafts and housings
Cleaning shaft and housing, confirming no scratched or machine burrs, no CZPT and cutting piece in housing. Secondly comppare with drawing, the shaft and housing of dimension, form and machining quality should be inspected.
chart 1 Measure location for shaft diameter                                                                         chart 2  Measure location for housing bore diameter                       

As chart 1 and chart 2 showing, divided several locations to be measure on shaft and housing bore diameters, It should be careful inspected perpendicular between shaft, housing fillet dimension and shoulder.
Before mounting bearing, it should be sprayed mechanical oil on fitting surface after check out the shaft and housing.

Bearing storage
Before leaving the factory, the bearing is sprayed proper rust-inhibiting oil and packed rust-inhibiting paper. The quality of bearing is guaranteed, if the packing is not broken.
For long-term storage, if the humidity less than 65% and the temperature about 20, it should storage on shelf which is higher 30cm than ground.
In addition, storage occasion should avoid sunshine and contact with cold wall.

Pictures about packaging

 

Company Profile

Our Advantages

1. World-Class Bearing: We provide our customers with all types of indigenous bearing with world-class quality.
2. OEM or Non-Stand Bearings: Any requirement for Nonstandard bearings is Easily Fulfilled by us due to its vast knowledge and links in the industry.
3. Genuine products With Excellent Quality: The company has always proved the 100% quality products it provides with genuine intent.
4. After Sales Service and Technical Assistance: The company provides after-sales service and technical assistance as per the customer’s requirements and needs.
5. Quick Delivery: The company provides just-in-time delivery with its streamlined supply chain. 
SAMPLES
1. Samples quantity: 1-10 PCS are available. 
2. Free samples: It depends on the Model No., material and quantity. Some of the bearings samples need client to
    pay samples charge and shipping cost. 
3. It’s better to start your order with Trade Assurance to get full protection for your samples order. 

CUSTOMIZED
The customized LOGO or drawing is acceptable for us. 

MOQ
1. MOQ: 10 PCS standard bearings. 
2. MOQ: 1000 PCS customized your brand bearings. 

OEM POLICY
1. We can printing your brand (logo, artwork)on the shield or laser engraving your brand on the shield. 
2. We can custom your packaging according to your design
3. All copyright own by clients and we promised don’t disclose any info.

 

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Motor Parts: Motor Bearing
Water Pump Parts: Water Pump Bearing
Air Compressor Parts: Air Compressor Bearing
Samples:
US$ 50/Piece
1 Piece(Min.Order)

|

Order Sample

black or white or as required
Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

deep groove ball bearing

Can you provide examples of scenarios where high-speed rotation benefits from deep groove ball bearings?

High-speed rotation often benefits from the use of deep groove ball bearings due to their specific design features and capabilities. Here are examples of scenarios where deep groove ball bearings are advantageous for high-speed rotation:

  • Electric Motors:
  • Deep groove ball bearings are commonly used in electric motors that require high-speed rotation, such as those found in industrial machinery, automotive applications, and household appliances. The low friction and smooth operation of deep groove ball bearings allow electric motors to achieve efficient and reliable performance at high rotational speeds.

  • Machine Tools:
  • In machine tools, such as milling machines and lathes, high-speed rotation is often necessary to achieve precise cutting and shaping operations. Deep groove ball bearings enable smooth and precise rotational motion, ensuring the accuracy and efficiency of machining processes at high speeds.

  • Spindles:
  • Spindles in various applications, including woodworking machines, CNC routers, and grinding machines, require high-speed rotation for precision operations. Deep groove ball bearings with their ability to handle both radial and axial loads and their low friction characteristics provide the necessary support and stability for high-speed spindle rotation.

  • Turbomachinery:
  • In turbomachinery applications such as turbochargers, centrifugal compressors, and gas turbines, high-speed rotation is essential for efficient energy conversion and power generation. Deep groove ball bearings, with their ability to accommodate high speeds and handle radial loads, are used to support the rotating components of such turbomachinery, ensuring reliable and continuous operation.

  • Automotive Wheels:
  • Deep groove ball bearings are commonly used in automotive wheels, where high-speed rotation is required. They support the radial and axial loads encountered during vehicle operation and allow smooth rotation at highway speeds. Deep groove ball bearings contribute to the overall performance, safety, and durability of automotive wheels.

  • High-Speed Fans and Blowers:
  • In applications such as industrial fans, HVAC systems, and turbo blowers, high-speed rotation is necessary to generate the desired airflow or pressure. Deep groove ball bearings are employed to support the fan or blower rotor, enabling smooth and efficient rotation at elevated speeds while minimizing energy losses.

  • Rotating Machinery in Aerospace:
  • In aerospace applications, various rotating components, including jet engines, helicopter rotors, and satellite mechanisms, require high-speed rotation. Deep groove ball bearings, designed to withstand high speeds and provide reliable performance, are used in these aerospace systems to ensure smooth operation and support critical functions.

In summary, deep groove ball bearings are beneficial for high-speed rotation in a wide range of scenarios. They find application in electric motors, machine tools, spindles, turbomachinery, automotive wheels, high-speed fans and blowers, as well as rotating machinery in the aerospace industry. The low friction, smooth operation, and ability to handle radial and axial loads make deep groove ball bearings suitable for supporting high-speed rotation while ensuring performance, precision, and reliability.

deep groove ball bearing

What are deep groove ball bearings and how are they used in various applications?

Deep groove ball bearings are a type of rolling element bearing that are widely used in various applications due to their versatility and performance. Here’s a detailed explanation of deep groove ball bearings and their applications:

  • Description and Design:
  • Deep groove ball bearings consist of an inner ring, an outer ring, a cage, and a set of steel balls. The inner and outer rings have deep raceway grooves that enable the bearings to accommodate both radial and axial loads. The presence of the steel balls between the rings allows for smooth and low-friction rotation. Deep groove ball bearings are typically made of high-quality bearing steel and are available in various sizes and configurations to suit different applications.

  • Radial Load Handling:
  • Deep groove ball bearings excel at handling radial loads, which are forces perpendicular to the shaft. The deep raceway grooves distribute the load evenly along the rolling elements, enabling the bearings to support high radial loads. This makes them suitable for applications where the primary load is predominantly radial, such as electric motors, pumps, gearboxes, and conveyor systems.

  • Axial Load Capability:
  • While deep groove ball bearings are primarily designed for radial loads, they can also handle limited axial loads, which are forces parallel to the shaft. The presence of the steel balls allows for some axial load transmission. However, it’s important to note that the axial load capacity of deep groove ball bearings is lower compared to dedicated thrust bearings. Therefore, they are typically used in applications with moderate axial loads or in combination with other bearing types to support both radial and axial loads.

  • Low-Friction Operation:
  • Deep groove ball bearings offer low-friction operation, thanks to the rolling contact between the steel balls and the raceway grooves. This reduces energy losses due to friction and enhances the overall efficiency of the system. The low-friction characteristics make deep groove ball bearings suitable for applications that require smooth and quiet operation, such as household appliances, automotive components, and precision machinery.

  • Wide Range of Applications:
  • Deep groove ball bearings find applications in a wide range of industries and equipment, including:

    • Automotive: Deep groove ball bearings are used in various automotive components, such as wheel hubs, alternators, starters, air conditioning compressors, and electric power steering systems.
    • Industrial Machinery: They are widely utilized in industrial machinery, including electric motors, pumps, fans, conveyors, machine tools, printing presses, and textile equipment.
    • Home Appliances: Deep groove ball bearings are found in appliances like washing machines, refrigerators, dishwashers, vacuum cleaners, and power tools.
    • Electronics and Office Equipment: They are used in computer disk drives, printers, copiers, scanners, and other electronic and office equipment.
    • Sports Equipment: Deep groove ball bearings are employed in applications like skateboards, bicycles, fitness equipment, and fishing reels.

In summary, deep groove ball bearings are versatile bearings that can handle radial loads and limited axial loads. They offer low-friction operation and are used in a wide range of applications across industries such as automotive, industrial machinery, home appliances, electronics, and sports equipment.

deep groove ball bearing

How do temperature variations and environmental conditions impact the performance of deep groove ball bearings?

Temperature variations and environmental conditions can have a significant impact on the performance of deep groove ball bearings. These factors can affect the bearing’s lubrication, material properties, dimensional stability, and overall operating characteristics. Here’s a detailed explanation of how temperature variations and environmental conditions impact the performance of deep groove ball bearings:

  • Lubrication:
  • Temperature variations can influence the viscosity and lubricating properties of the bearing grease or oil. High temperatures can cause lubricants to thin out, reducing their ability to form a protective film between the rolling elements and raceways. This can lead to increased friction, wear, and heat generation, potentially resulting in premature bearing failure. Conversely, extremely low temperatures can cause lubricants to thicken, impeding their flow and impairing the bearing’s ability to maintain proper lubrication. It is crucial to select lubricants suitable for the expected temperature range to ensure optimal lubrication and minimize the negative effects of temperature variations on bearing performance.

  • Material Properties:
  • Temperature variations can affect the material properties of the bearing components. High temperatures can cause thermal expansion, leading to dimensional changes in the bearing’s inner and outer rings, as well as the rolling elements. This can result in increased radial internal clearance and potential misalignment, affecting the bearing’s running accuracy and performance. Additionally, high temperatures can accelerate the aging or degradation of bearing materials, reducing their strength and fatigue resistance. Extreme cold temperatures, on the other hand, can make materials more brittle, increasing the risk of fracture or damage under load. It is important to consider the expected temperature range and select bearing materials that can withstand the anticipated thermal conditions to ensure reliable and long-lasting performance.

  • Dimensional Stability:
  • Temperature variations can impact the dimensional stability of deep groove ball bearings. As temperatures change, the bearing components can expand or contract, affecting the internal clearance and fit of the bearing. This can lead to changes in running accuracy, noise levels, and the ability to maintain proper alignment within the application. In applications where precise positioning or running accuracy is critical, temperature variations must be taken into account to ensure the bearing maintains the required dimensional stability and performance under varying thermal conditions.

  • Operating Characteristics:
  • Temperature variations can affect the overall operating characteristics of deep groove ball bearings. High temperatures can increase the operating noise and vibration levels of the bearing, potentially impacting the comfort and performance of the machinery or equipment in which the bearing is installed. Temperature-induced expansion or contraction can also affect the bearing’s ability to handle axial or radial loads, potentially altering the load distribution and causing uneven wear or excessive loading on certain areas of the bearing. Understanding the operating characteristics of the bearing in relation to temperature variations is crucial for selecting the appropriate bearing type and size for the specific application.

  • Environmental Effects:
  • Environmental conditions, such as dust, moisture, chemicals, or corrosive substances, can also impact the performance of deep groove ball bearings. Dust and dirt particles can infiltrate the bearing, leading to increased friction, wear, and potential damage to the rolling elements and raceways. Moisture or corrosive substances can cause rust or corrosion, compromising the bearing’s structural integrity and lubrication properties. It is important to consider the environmental conditions in which the bearing will operate and select appropriate sealing solutions or protective coatings to mitigate the effects of contaminants or corrosive elements.

In summary, temperature variations and environmental conditions can significantly impact the performance of deep groove ball bearings. By understanding the effects of temperature on lubrication, material properties, dimensional stability, and operating characteristics, appropriate measures can be taken to ensure optimal bearing performance and longevity. Considering the expected temperature range, selecting suitable materials, providing proper lubrication, addressing dimensional changes, and protecting against environmental factors are all important considerations when using deep groove ball bearings in different operating conditions.

China factory 6810 2RS Thin Wall Shielded 50*65*7 mm ABEC3 Deep Groove Ball Bearing   bearing driverChina factory 6810 2RS Thin Wall Shielded 50*65*7 mm ABEC3 Deep Groove Ball Bearing   bearing driver
editor by CX 2024-04-10